Post Reply
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Overclocking to higher than 1440p60
07-09-2019, 04:51 AM
Post: #1
Overclocking to higher than 1440p60
I have a Korean monitor that I managed to overclock to 189Hz using Nvidia's control panel. The thing is, I'd rather use my AMD card as FreeSync works there (I guess Nvidia lied about supporting FreeSync). However, in CRU, it's not letting me go above 165Hz. AMD's control panel just flat out refuses anything about 165Hz.

Any ideas?
Find all posts by this user
Quote this message in a reply
07-09-2019, 10:27 PM
Post: #2
RE: Overclocking to higher than 1440p60
Turns out 9xx series is not supported. Bummer.
Find all posts by this user
Quote this message in a reply
07-09-2019, 11:44 PM
Post: #3
RE: Overclocking to higher than 1440p60
What monitor? What resolution? What happens when you try to go above 165 Hz?
Find all posts by this user
Quote this message in a reply
07-10-2019, 09:40 PM
Post: #4
RE: Overclocking to higher than 1440p60
https://imgur.com/a/RH8I9rX

Both CRU and Radeon drivers do not want to go higher. Nvidia Control Panel has no problem doing so.
Find all posts by this user
Quote this message in a reply
07-10-2019, 09:56 PM
Post: #5
RE: Overclocking to higher than 1440p60
You need to add a DisplayID extension block and add a detailed resolutions data block in there to go higher than 655.35 MHz pixel clock. I would also edit the range limits and set the max pixel clock high enough so the driver doesn't ignore it.
Find all posts by this user
Quote this message in a reply
 Post Reply


Forum Jump:


User(s) browsing this thread: 2 Guest(s)