Post Reply
Strobelight - LightBoost Utility for AMD/ATI and NVIDIA
08-24-2013, 07:25 PM
Post: #121
RE: Strobelight - LightBoost Utility for AMD/ATI and NVIDIA
(08-24-2013 06:38 PM)puzzled120hz Wrote:  But I am experiencing some weird shadows/artifacts(?) at the bottom of my screen when I am scrolling(in browser) or moving(in game).
It only happens at the bottom of the screen. It disturbs me the most in games and when browsing facebook.
That's normal. The screen refreshes from top to bottom, but the backlight strobes the entire screen at once, so the pixels at the bottom of the screen don't have as much time to transition.
Find all posts by this user
Quote this message in a reply
08-24-2013, 07:36 PM
Post: #122
RE: Strobelight - LightBoost Utility for AMD/ATI and NVIDIA
(08-23-2013 04:19 PM)SeNsEi Wrote:  I recently ordered a XL2420T and plan to lightboost hack it. I was hoping someone could confirm that I'm not overlooking anything in terms of compatibility.

Monitor: BenQ XL2420T
Computer: Sager NP9370 Laptop with AMD Crossfire 7970m's (no switchable graphics in this laptop)
Connection used: DisplayPort 1.2 port
In theory, that should work, but this is all experimental, so you'll have to tell us if it works.

(08-23-2013 04:19 PM)SeNsEi Wrote:  P.S. I've seen people mention websites on forums where users post their optimal color/saturation/etc. settings for monitors post-lightboost hack. Could someone please point me in the right direction? I've been stuck to playing counterstrike on my 60hz laptop screen using 200 saturation in CCC for better in-game distinguishing.
The main problems with LightBoost are low contrast and gamma. The contrast can't really be fixed, and gamma settings don't tend to stick in games. You won't have trouble distinguishing details in dark areas with the default gamma.
Find all posts by this user
Quote this message in a reply
08-24-2013, 07:49 PM
Post: #123
RE: Strobelight - LightBoost Utility for AMD/ATI and NVIDIA
(08-24-2013 07:25 PM)ToastyX Wrote:  That's normal. The screen refreshes from top to bottom, but the backlight strobes the entire screen at once, so the pixels at the bottom of the screen don't have as much time to transition.
Alright, so it's normal. I'm a bit disappointed that it can't be fixed, but on the other hand I'm relieved, because I suspected my monitor was broken.
I'll most definitely keep using lightboost, regardless of some artifacts here and there.

Thanks for a quick response and for making this software!
Find all posts by this user
Quote this message in a reply
08-28-2013, 08:12 AM (Last edited: 08-28-2013, 08:18 AM by mdrejhon)
Post: #124
RE: Strobelight - LightBoost Utility for AMD/ATI and NVIDIA
ToastyX, you just got mentioned in a Norwegian LightBoost HOWTO:
http://www.hardware.no/artikler/guide-2d...ost/136262

(08-24-2013 07:36 PM)ToastyX Wrote:  The main problems with LightBoost are low contrast and gamma.
If you have extra money, buy the VG278H instead; you get double the LightBoost contrast of VG248QE, and no purple tint effect. You can also jack the contrast ratio upwards on the VG278H to 90% and get >900:1 with no black clipping / white clipping. The bottom-edge ghosting is also a little less than VG278HE and XL2720TE, but not as ghost-free as VG248QE. (The ghost image is not the traditional blurred ghost, but a sharp image like 3D crosstalk). The VG278H is currently the least-compromises LightBoost monitor.
Find all posts by this user
Quote this message in a reply
08-28-2013, 09:21 AM (Last edited: 08-28-2013, 09:21 AM by crossfire266)
Post: #125
RE: Strobelight - LightBoost Utility for AMD/ATI and NVIDIA
Can someone please help me ? I keep getting
I have the BENQ XL2411T
[2013-08-28 19:20:14.143] LOAD(AMD): LoadLibrary("atiadlxx.dll") = ERROR 126
[2013-08-28 19:20:14.143] LOAD(AMD): LoadLibrary("atiadlxy.dll") = ERROR 126
[2013-08-28 19:20:14.158] LOAD(NVIDIA): NvAPI_Initialize() = SUCCESS
[2013-08-28 19:20:14.970] INIT(NVIDIA, 0, 21): 3D = FALSE
[2013-08-28 19:20:15.172] INIT(NVIDIA, 0, 21): VENDOR = 0x10 (BenQ compatible)
[2013-08-28 19:20:15.172] INIT(NVIDIA, 0, 21): Initializing display 1...
[2013-08-28 19:20:15.843] INIT: No compatible displays found.
Find all posts by this user
Quote this message in a reply
08-28-2013, 04:49 PM (Last edited: 08-28-2013, 05:42 PM by mN-)
Post: #126
RE: Strobelight - LightBoost Utility for AMD/ATI and NVIDIA
Hey,

I recently bought ASUS VG248QE after hearing about lightboost.
I have gtx480.

Problem is, it works good and I can see clearer motion. But when I am playing CS:GO or quake 3 cpma with lightboost on @120hz I feel like im having big input lag. I tried with both vsync-on and off and adaptative vsync.

Is there any solution for this? In quake i have a steady 120fps (and it's a really old game).

In cs:go I had a jumpy 150-300fps before with multirendering on, with lightboost a steady 120fps (so I dont think my gtx480 should be the problem).

I am also curious if any other serious gamers /progamers experience this.

Thanks for your help guys

---------

if this helps any: I got i7 x980 @ 3.8ghz, 10gb ram, win 7 home
-------

edit: I think it was due to vsync and/or multirendering on. I have to investigate this more tomorrow

edit2: so after reading someother website talking about this apparently VSYNC gives input lag.

Does lightboost give inputlag if vsync is off?
Find all posts by this user
Quote this message in a reply
08-28-2013, 06:06 PM (Last edited: 08-28-2013, 06:08 PM by mdrejhon)
Post: #127
RE: Strobelight - LightBoost Utility for AMD/ATI and NVIDIA
(08-28-2013 04:49 PM)mN- Wrote:  Does lightboost give inputlag if vsync is off?
VSYNC OFF has less input lag, but it can amplify microstutters that makes LightBoost feel less smooth. (LightBoost clarity makes tearing/microstutters easier to see)

If you like the LightBoost motion and lag with VSYNC OFF, keep VSYNC OFF for the best competitive advantage. Adaptive VSYNC is a tradeoff that tries to minimize lag while simultaneously eliminating the microstutters made more visible by LightBoost. But if any visible microstutters aren't bothersome (framerates in huge excess of Hz helps a lot for VSYNC OFF), then use VSYNC OFF.

VSYNC ON -- Most lag, motion looks most beautiful if framerate caps fully at Hz. Severe changes in framerates/lag during slowdowns (e.g. 120fps falls to 60fps).
VSYNC OFF -- Least lag, but microstutters/tearing can become more visible with CRT's and LightBoost. LightBoost can look 'jittery' sometimes.
Adaptive VSYNC -- Tries to combine the best of the two above. Generally will have less lag than VSYNC ON, more lag than VSYNC OFF
Find all posts by this user
Quote this message in a reply
08-29-2013, 04:23 AM
Post: #128
RE: Strobelight - LightBoost Utility for AMD/ATI and NVIDIA
(08-28-2013 09:21 AM)crossfire266 Wrote:  Can someone please help me ? I keep getting
I have the BENQ XL2411T
There seems to be a communication issue with the monitor. How do you have it connected? Make sure it's dual-link DVI. Try another cable if you have one. Try the other DVI port as well.
Find all posts by this user
Quote this message in a reply
08-29-2013, 07:10 AM (Last edited: 08-29-2013, 07:14 AM by mN-)
Post: #129
RE: Strobelight - LightBoost Utility for AMD/ATI and NVIDIA
(08-28-2013 06:06 PM)mdrejhon Wrote:  
(08-28-2013 04:49 PM)mN- Wrote:  Does lightboost give inputlag if vsync is off?
VSYNC OFF has less input lag, but it can amplify microstutters that makes LightBoost feel less smooth. (LightBoost clarity makes tearing/microstutters easier to see)

If you like the LightBoost motion and lag with VSYNC OFF, keep VSYNC OFF for the best competitive advantage. Adaptive VSYNC is a tradeoff that tries to minimize lag while simultaneously eliminating the microstutters made more visible by LightBoost. But if any visible microstutters aren't bothersome (framerates in huge excess of Hz helps a lot for VSYNC OFF), then use VSYNC OFF.

VSYNC ON -- Most lag, motion looks most beautiful if framerate caps fully at Hz. Severe changes in framerates/lag during slowdowns (e.g. 120fps falls to 60fps).
VSYNC OFF -- Least lag, but microstutters/tearing can become more visible with CRT's and LightBoost. LightBoost can look 'jittery' sometimes.
Adaptive VSYNC -- Tries to combine the best of the two above. Generally will have less lag than VSYNC ON, more lag than VSYNC OFF

Hey, thanks for your response.
I really like this lightboost, and it does get a little jittery with VSYNC off but it doesn't bother me that much.

But when you say VSYNC off has least lag, do you mean it adds a little bit of input lag compared to just having 144hz, or do you mean it still has a little input lag due to monitor?
[Also, I'd be curious to know if anyone knows if multirendering adds inputlag or not (CS:GO). It says "disabled" mode has higher framerate, but my fps drops by roughly 80fps to around 170ish]
Find all posts by this user
Quote this message in a reply
08-29-2013, 08:24 PM (Last edited: 08-29-2013, 08:27 PM by crossfire266)
Post: #130
RE: Strobelight - LightBoost Utility for AMD/ATI and NVIDIA
(08-29-2013 04:23 AM)ToastyX Wrote:  
(08-28-2013 09:21 AM)crossfire266 Wrote:  Can someone please help me ? I keep getting
I have the BENQ XL2411T
There seems to be a communication issue with the monitor. How do you have it connected? Make sure it's dual-link DVI. Try another cable if you have one. Try the other DVI port as well.

Using boot camp on my macbook pro retina and running windows 7 ultimate
I'm using a Mini DisplayPort to Dual-Link DVI Adapter from my macbook pro retina to my BENQ XL2411T, is this the problem? Also I tried the CRT method it I think it works?
How do I know if lightboost is enabled because I got through applying it on nvidia settings and turned on 3d stereoscopic and have set the option to always but I don't notice any 'dim of screen' people claim to experience

This is a link to the cable im using from the apple store http://store.apple.com/au/product/MB571Z...vi-adapter

Also is there a link to adding a 144 hz lightboost using the CRT method? and is it better in terms of ms in comparison to 120hz lightboost ?

Thank you!
Find all posts by this user
Quote this message in a reply
 Post Reply


Forum Jump:


User(s) browsing this thread: 10 Guest(s)