Custom Resolution Utility (CRU)

[ToastyX]

(07-13-2020 10:58 PM)Crystalyne Wrote:  Ah, makes sense!
In that case, is there any way to force the Displayport link speed? The monitor supports Displayport 1.4 HBR3 (GPU only supports DP1.2 HBR2), but according to Radeon software it's only using HBR when in 2k 75Hz, which would be why it can't send 10-bit. If I set the monitor to 4k 50Hz HDR (the highest refresh you can get on HBR2) I can see the link speed has changed to HBR2!

I don't know any way to change the speed.

[4700mq]

my laptop is msi gf65 9sd

gtx1660ti
16 gb ram
120hz panel with 15.6 inches
and ssd 512
its impossibile to set a custom or any other hertz to this laptop or to other 14 other laptops which has intel gpu and nivida gpu. this app is broken or dead? or its just a luck i cant make any hertz? the alt methood does not work, it wont make any result, the normal way ( using the exe cru app ) then restart wont add values to the hz poll in the settings.

i can not change the refresh rate what so ever i do.

i tried this steps but not work:

on windows 8.1 installed the latest driver and tried to change from control panel of intel but it show that it exceeds maximum bandwith i tried on all resoultion i tried to underclock the refresh rate to 58 or 59 not worked i tried everything it can not add any new values.
i tried CRU added new values and clicked on restart 64 and restarted my laptop but the values are not in the control panel or not in the contorl panel of windows nor in the list all modes option.
i tried to overclock the other montiors on the CRU (the not active monitors) same thing. i tried on older versions of the driver same thing. i tried new apps same thing.

and for windows 10 i tried all the steps above but the same thing.

and my gt730M has no refresh rate or custom resoltions option it has only 2 options.

[maftul]

Anybody has any idea if it is possible to remove the resolutions in the following snippet from Nvidia's driver using CRU?

   

I am trying to get 4K DSR working on my new 2K 144 monitor but all my games see are these phantom resolutions and refresh rates. I don't understand why there even is a 4k resolution in Nvidia's list of resolutions when my monitor does not support such resolution by default. For the record, the monitor model is Lenovo Legion Y27q-20. I have already tried removing all the TV resolutions in the CEA-861 extension block shown with CRU but it made no difference.

[ToastyX]

(07-16-2020 07:07 AM)maftul Wrote:  I am trying to get 4K DSR working on my new 2K 144 monitor but all my games see are these phantom resolutions and refresh rates. I don't understand why there even is a 4k resolution in Nvidia's list of resolutions when my monitor does not support such resolution by default. For the record, the monitor model is Lenovo Legion Y27q-20. I have already tried removing all the TV resolutions in the CEA-861 extension block shown with CRU but it made no difference.

4K should not exist if you remove it from CRU. Export what you have into a file and post it here.

[filmgeek47]

Hey guys. Wondering if it's possible to use CRU to specify an output bit depth setting as well as a custom resolution? Having issues with my Nvidia card on an older driver (which I need for 3D support), where the bit depth setting resets every time I reboot.

[ToastyX]

(07-16-2020 08:06 PM)filmgeek47 Wrote:  Hey guys. Wondering if it's possible to use CRU to specify an output bit depth setting as well as a custom resolution? Having issues with my Nvidia card on an older driver (which I need for 3D support), where the bit depth setting resets every time I reboot.

You can't specify a bit depth for individual resolutions.

[filmgeek47]

(07-17-2020 12:38 AM)ToastyX Wrote:  

(07-16-2020 08:06 PM)filmgeek47 Wrote:  Hey guys. Wondering if it's possible to use CRU to specify an output bit depth setting as well as a custom resolution? Having issues with my Nvidia card on an older driver (which I need for 3D support), where the bit depth setting resets every time I reboot.

You can't specify a bit depth for individual resolutions.

To clarify, I don't need to set it for a SPECIFIC res. I just need it to default to the highest possible setting (i.e. 12bit at 24hz 4k, 8bit at 60hz 4k etc). Is that possible? if not, is it a feature that could be added at some point? This has apparently been an on-off problem with Nvidia driver releases for some time.

[4700mq]

gtx1660ti
16 gb ram
120hz panel with 15.6 inches
and ssd 512
its impossibile to set a custom or any other hertz to this laptop or to other 14 other laptops which has intel gpu and nivida gpu. this app is broken or dead? or its just a luck i cant make any hertz? the alt methood does not work, it wont make any result, the normal way ( using the exe cru app ) then restart wont add values to the hz poll in the settings.

i can not change the refresh rate what so ever i do.

i tried this steps but not work:

on windows 8.1 installed the latest driver and tried to change from control panel of intel but it show that it exceeds maximum bandwith i tried on all resoultion i tried to underclock the refresh rate to 58 or 59 not worked i tried everything it can not add any new values.
i tried CRU added new values and clicked on restart 64 and restarted my laptop but the values are not in the control panel or not in the contorl panel of windows nor in the list all modes option.
i tried to overclock the other montiors on the CRU (the not active monitors) same thing. i tried on older versions of the driver same thing. i tried new apps same thing.

and for windows 10 i tried all the steps above but the same thing.

and my gt730M has no refresh rate or custom resoltions option it has only 2 options.

not giving a detailed post u guys keep rumbbling about that i might missed something which is false
giving detailed post u guys ignore me, in both siutaions u guys are so rude.

[ToastyX]

(07-17-2020 12:56 AM)filmgeek47 Wrote:  To clarify, I don't need to set it for a SPECIFIC res. I just need it to default to the highest possible setting (i.e. 12bit at 24hz 4k, 8bit at 60hz 4k etc). Is that possible? if not, is it a feature that could be added at some point? This has apparently been an on-off problem with Nvidia driver releases for some time.

The EDID doesn't control what the bit depth defaults to. That's up to the driver.

[CorneliousJD]

Hi all, I'm having some trouble!

Long story short, new DisplayPort monitor keeps being disconnected from the system when it goes into standby, and I wanted to override the EDID so Windows just thinks it is always connected and I can always render out to it (so it stops messing up my windows/icons constantly!!!)

I could honestly use some help on how to do that in the first place, but my first hiccup is as follows.

It's a Samsung Odysssey G9 (5120x1440)
Every time I try to enter 5120 into the resolution box it shows in red and doesn't let me save it.

Any help is appreciated. Thanks in advance!