Custom Resolution Utility (CRU)
|
03-18-2015, 06:33 PM
(Last edited: 03-18-2015, 06:57 PM by Trendle)
Post: #1277
|
|||
|
|||
RE: Custom Resolution Utility (CRU)
ToastyX,
I appreciate the time and effort that you put into this program, I really do, but unfortunately I could never get this to work properly like I intended it to work. I'm not saying that it's your program's fault, I suspect Windows (using 8.1 now) and/or AMD Catalyst (14.12 Omega at the moment) have a lot to do with it failing, but I was unable to resolve the issues that I had over the past few months. What I wanted to do was fairly simple: I wanted to bump my LCD from 1080p@60Hz to 75Hz, and also set my CRT to a custom resolution of 920x690@170Hz. Obviously both of the monitors are capable of achieving this. LCD: I couldn't get 75Hz to work automatically, I had to manually set it 70-90% of the time after every reboot. Sometimes it did work properly, but I don't know why. CRT: After every reboot the resolution automatically changed to 1024x768@140Hz. Bare in mind that this is with all other resolutions being deleted from the EDID. I could, however, get a consistent result using 800x600, but only at a refresh rate of 160Hz. I had to set 170Hz manually every time. I did try manually editing the Windows registry to change the default resolution and refresh rate, but the keys were being overwritten after every reboot, even when I removed all SYSTEM permissions. If only I could get this to work as it should... it would make my year. |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 112 Guest(s)