Custom Resolution Utility (CRU)
|
10-01-2017, 01:52 AM
Post: #3177
|
|||
|
|||
RE: Custom Resolution Utility (CRU)
(09-30-2017 09:14 PM)ToastyX Wrote:Unplugging and repulgging alsways results in it not detecting the replug. Meaning I have to reboot to get display again. I think I'll try a HDMI to dvi cable. If that fails I may just buy a freesync monitor anyway.(09-30-2017 12:12 PM)Tweakforce_LG Wrote: I have an AOC E2450SD 60hz TN monitor.Any monitor with an OSD has a scaler. Getting FreeSync to work with DVI requires tricking the driver into thinking it's HDMI, which requires physically unplugging and reconnecting the DVI cable with the RX 480. This has to be done after every reboot, so it's not practical. I don't understand why you are setting the maximum TMDS clock to 660 MHz when that does nothing, or why you are including the range limits in the main window with the maximum pixel clock set to 170 MHz, which isn't necessary either and contradicts your config. You shouldn't need anything except the HDMI data block and the FreeSync data block and a detailed resolution for the maximum refresh rate. |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 62 Guest(s)