Threaded Mode | Linear Mode

***ToastyX*** · 08-12-2020, 11:55 PM

(08-12-2020 10:08 PM)jaikomodo Wrote: QUICK EDIT: I realized it was not plugged into a USB 3.0 hub and instead a USB 2.0 so i swapped it and the resolution was fixed. Now my only issue is flickering and cutting out of the monitor (I think it has to do with a message I keep getting about the adapter not being compatible with my GPU but I have the drivers installed so I don't know why I keep getting the message). I can post a video if requested. Thanks for the more help!

Cutting out is usually a signal quality problem. It might be because you're going through two adapters, or the connection is loose.

linky · 08-16-2020, 06:14 PM

I am trying to get nvidia surround working on my 3 4k screens. I am running them at 2560x1440p 120hz. When I go to enable surround the only option is 4k resolution. I tried removing everything but 1440p resolution from detailed resolutions section but that still does not work, only 4k shows up in nvidia surround. I try to add 2560x1440 in standard resolutions section but there is no option for that and custom resolution does not allow me to add that resolution. Suggestions on what to try to get this to work? thanks!!

***ToastyX*** · 08-16-2020, 08:54 PM

(08-16-2020 06:14 PM)linky Wrote: I am trying to get nvidia surround working on my 3 4k screens. I am running them at 2560x1440p 120hz. When I go to enable surround the only option is 4k resolution. I tried removing everything but 1440p resolution from detailed resolutions section but that still does not work, only 4k shows up in nvidia surround. I try to add 2560x1440 in standard resolutions section but there is no option for that and custom resolution does not allow me to add that resolution. Suggestions on what to try to get this to work? thanks!!

Did you remove the 4K TV resolutions in the extension block?

linky · (Last edited: 08-17-2020, 07:22 AM by linky)

in extension block and under detailed resolutions? If so then yeah, the only res listed there is 2560x1440.

[Image: http://imgur.com/nBBT9Kw]

Or do I also need to go to TV resolutions under extension blocks and remove the 4k res's listed there as well?

[Image: http://imgur.com/VsZJMiC]

***ToastyX*** · 08-17-2020, 03:22 PM

(08-17-2020 07:19 AM)linky Wrote: Or do I also need to go to TV resolutions under extension blocks and remove the 4k res's listed there as well?

Yes, if you want to remove 4K completely.

linky · (Last edited: 08-17-2020, 03:53 PM by linky)

(08-17-2020 03:22 PM)ToastyX Wrote:
(08-17-2020 07:19 AM)linky Wrote: Or do I also need to go to TV resolutions under extension blocks and remove the 4k res's listed there as well?
Yes, if you want to remove 4K completely.

Okay but it will not allow me to add 2560x1440 in the tv resolutions, its not listed and when trying to add custom its asking for 0-255 or other sections (that does not have 0-255 option) the second you put in 2560 it goes red and not accepts it. Or do I not need to add in the res in that section?

***ToastyX*** · 08-17-2020, 04:34 PM

(08-17-2020 03:52 PM)linky Wrote: Okay but it will not allow me to add 2560x1440 in the tv resolutions, its not listed and when trying to add custom its asking for 0-255 or other sections (that does not have 0-255 option) the second you put in 2560 it goes red and not accepts it. Or do I not need to add in the res in that section?

You do not need to add the same resolution in multiple places.

linky · (Last edited: 08-17-2020, 04:51 PM by linky)

(08-17-2020 04:34 PM)ToastyX Wrote:
(08-17-2020 03:52 PM)linky Wrote: Okay but it will not allow me to add 2560x1440 in the tv resolutions, its not listed and when trying to add custom its asking for 0-255 or other sections (that does not have 0-255 option) the second you put in 2560 it goes red and not accepts it. Or do I not need to add in the res in that section?
You do not need to add the same resolution in multiple places.

hmm not working, after removing all the 4k res's from extension block (only 1440 was in there and removing 4k res's from tv res section in extension block I was left with 4k option in surround but 24hz this time.

[Image: http://imgur.com/G6pIOIe]

This is what I have now, I will take ss's of each section

[Image: http://imgur.com/ccVLUfI]

[Image: http://imgur.com/TJ8xPkm]

[Image: http://imgur.com/cODMAH0]

I tried this way and no go and tried removing all the 3840 and 4096 res's in tv resolutions under extension block, also no luck.

***ToastyX*** · 08-17-2020, 07:48 PM

(08-17-2020 04:45 PM)linky Wrote: I tried this way and no go and tried removing all the 3840 and 4096 res's in tv resolutions under extension block, also no luck.

Check the HDMI support data block. That's the only other place it could be.

linky · 08-17-2020, 10:18 PM

(08-17-2020 07:48 PM)ToastyX Wrote:
(08-17-2020 04:45 PM)linky Wrote: I tried this way and no go and tried removing all the 3840 and 4096 res's in tv resolutions under extension block, also no luck.
Check the HDMI support data block. That's the only other place it could be.

Okay that seems to be working, thank you. When I rebooted the computer it was messed up again, will I have to do this each time I reboot?