Custom Resolution Utility (CRU)

[ToastyX]

(08-15-2016 07:52 PM)Decado Wrote:  I have a gtx 1070 and 1080p Toshiba 120hz HDTV.

I set a custom resolution to 720p (making it "native") for downsampling in 3D games. Now the 3D mode isn't working properly. Colours are red-tinged like it is trying to use a different form of 3D and my passive glasses do not work. Is it because my PC now thinks I am using a DVI connection instead of HDMI? Suggestions?

HDMI 3D support is defined in the extension block in the HDMI support data block. CRU doesn't have a way to read the default extension block or add 3D support directly, but it can be imported.

Use MonInfo to save the "real-time" EDID for the monitor to a .bin file: http://www.entechtaiwan.com/util/moninfo.shtm

Then import the file using CRU. That should import the default extension block as a custom extension block and preserve 3D support.

(08-15-2016 07:52 PM)Decado Wrote:  Regarding my HDTV, am I correct in my understanding that just because it says 120hz, doesn't mean it is capable of 120 fps, even using this utility?

120 Hz TVs normally take 60 Hz input and use motion interpolation to output 120 Hz, so there's no guarantee that it will accept higher refresh rates.