EDID/DisplayID Writer

[xblaster]

Hi,
good work toasty.

I am trying this tool for MSI GT72VR 7RE. There is MSI mxm GTX1070 card and edp (display port 1.4) panel = > Replaced faulty lcd panel and after this change no GSYNC support and backlight problems with some nvidia drivers. Display is different model. So I tried replace EDID from original one. There is problem with write protected error. So I disassembled this panel and there is winbond spi flash instead of eeprom with pull down resistor for disable writing. After modification (switch to pull up resistor) still write protected error. So then I soldered wires to flash and connected it to external programmer. There were fuses for software data protection. After disabling fuses still error in application. Winbond reflashed via external programmmer but GSYNC is missing. I made some differences in original EDID new panel is 144hz instead of 120hz so I will try flash original EDID now.