LG 34UC80 Overclocking past 75hz with Freesync enabled

[DrR0Ck]

(04-29-2018 10:50 PM)ToastyX Wrote:  Make sure the H rate matches the new resolution (119-119 kHz), and make sure the max pixel clock is high enough to include the new resolution (multiple of 10, so 440 MHz).

Thanks - I tried adding these, but same result. Couple of questions:

Do I need to set the Freesync range in the extension block as well? I'm thinking no, since I'm on display port, but let me know if I'm mistaken.

How are the H rate and pixel clock calculated for the Freesync range? I've done some searching as I prefer to try to work this stuff out on my own rather than bugging folks, but I haven't been able to find any solid information.

Unfortunately, I'm thinking I may not be able to get the monitor overclocked with Freesync at this point unless you have some other tricks up your sleeve. ;-)

Thanks again!