Post Reply
Custom Resolution Utility (CRU)
09-21-2019, 04:23 PM
Post: #4211
RE: Custom Resolution Utility (CRU)
(09-21-2019 05:39 AM)daPhie79 Wrote:  The moment I change the freesync range of my monitor LG 27UD59P (from 40-61 to 33-61), nvidia control panel app stops working (rtx 2060, latest driver v436.30). If I reset all, it opens once again. I've tested the resulting range with pendulum demo and it works, but nvidia control panel is borked.
If it's still broken after a full reboot, then it's a bug in the NVIDIA control panel that you should report to NVIDIA. There's no reason for an EDID override to break the control panel.
Find all posts by this user
Quote this message in a reply
09-21-2019, 04:24 PM
Post: #4212
RE: Custom Resolution Utility (CRU)
(09-21-2019 03:31 PM)Sourcesys Wrote:  Now everytime I try to overclock it, the TV accepts the Resolution, but I get frameskipping.

Do I have any chance of fixing it and creating a 120hz resolution without frameskipping? Do these OLED Panels OC differently than LCDs?
If you're trying to add 1920x1080 @ 120 Hz, use "LCD native" to match the CEA-861 standard (pixel clock should be 297.00 MHz). If that skips frames, then the TV probably can't do higher refresh rates without skipping frames. This is usually a firmware limitation in the TV rather than a hardware limitation of the panel.
Find all posts by this user
Quote this message in a reply
09-22-2019, 03:02 AM
Post: #4213
RE: Custom Resolution Utility (CRU)
(09-21-2019 04:23 PM)ToastyX Wrote:  
(09-21-2019 05:39 AM)daPhie79 Wrote:  The moment I change the freesync range of my monitor LG 27UD59P (from 40-61 to 33-61), nvidia control panel app stops working (rtx 2060, latest driver v436.30). If I reset all, it opens once again. I've tested the resulting range with pendulum demo and it works, but nvidia control panel is borked.
If it's still broken after a full reboot, then it's a bug in the NVIDIA control panel that you should report to NVIDIA. There's no reason for an EDID override to break the control panel.

it's probably an nvidia error indeed, but then again they won't care for this specific case. it only happens the moment i modify anything with CRU, and it starts working again when i reset all. if i just redefine the value i've changed to its original value, the CP still crashes.

i know it didn't happen before at some point, but now it does this. just annoying and i was wondering if anyone had gotten this result also.
Find all posts by this user
Quote this message in a reply
09-23-2019, 10:55 PM
Post: #4214
RE: Custom Resolution Utility (CRU)
(09-21-2019 04:23 PM)ToastyX Wrote:  
(09-21-2019 05:39 AM)daPhie79 Wrote:  The moment I change the freesync range of my monitor LG 27UD59P (from 40-61 to 33-61), nvidia control panel app stops working (rtx 2060, latest driver v436.30). If I reset all, it opens once again. I've tested the resulting range with pendulum demo and it works, but nvidia control panel is borked.
If it's still broken after a full reboot, then it's a bug in the NVIDIA control panel that you should report to NVIDIA. There's no reason for an EDID override to break the control panel.

to follow up on my issue, it seems it does not occur when installing the full fat driver, so i guess there's something nvcleanstall removes that somehow is needed by the control panel that only becomes necessary when the EDID is overridden? lol. i didn't think of it initially, but then remembered about it and tried installing the full driver. it's so farfetched!
Find all posts by this user
Quote this message in a reply
09-24-2019, 02:47 PM (Last edited: 09-24-2019, 03:35 PM by TheSTronic)
Post: #4215
Information RE: Custom Resolution Utility (CRU)
I have lg 25um58-p 2х HDMI 1.4 2560x1080 aspect ratio 21:9 monitor with GA-78LMT-USB3 motherboard (ATI RADEON 3000 Graphics onboard), Windows 10.

I applied the patch for AMD/ATI Pixel Clock Patcher all values current state "already patched", value Low-resolution limit current state "found".

The motheboard manufacture stated: * HDMI 1.3 certified in video spec only, Integrated HDMI/DVI/D-sub for Full HD 1080 contents playback, 1 x HDMI port, supporting a maximum resolution of 1920x1200 (Note 3).

AMD Vision Engine Control Center have no any videocard settings, but CPUs, it have not the offical support for Windows 10. Max resolution is 1920*1080 in display settings.

Detailed resolution found 2560*1080 @ 59.99 Hz (185.58 Mhz -/-).

The problem I can not add my custom resolution 2560*1080 by other resolutions to standard resolutions and the resolution not listed in standard resolutions drop-down menu. It colored red when I trying enter the monitor default resolution 2560*1080 Confused

I calculated the pixels: 2560*1080*59.99= 165,86. I ready to down refresh rates.

ATI display adapter (0x9116)
Internal Dac (400 MHz)
@oem14.inf, %amd9616.1%;ATI Radeon 3000
BK-ATI VER010.094.001.033.000000

Advanced Micro Devices, Inc
13.01.2015
8.970.100.9001 (driver version)

Standard Timing:


Standard Timings n° 1
X Resolution : 1152
Y Resolution : 864
Vertical Frequency : 75

Standard Timings n° 2
X Resolution : 1280
Y Resolution : 1024
Vertical Frequency : 60

Standard Timings n° 3
X Resolution : 1280
Y Resolution : 720
Vertical Frequency : 60

Standard Timings n° 4
X Resolution : 1600
Y Resolution : 900
Vertical Frequency : 60

Preferred Detailed Timing:

Pixel Clock : 185,58 Mhz

Horizontal Active : 2560 pixels
Horizontal Blanking : 224 pixels
Horizontal Sync Offset : 64 pixels
Horizontal Sync Pulse Width : 64 pixels
Horizontal Border : 0 pixels
Horizontal Size : 673 mm

Vertical Active : 1080 lines
Vertical Blanking : 31 lines
Vertical Sync Offset : 3 lines
Vertical Sync Pulse Width : 10 lines
Vertical Border : 0 lines
Vertical Size : 284 mm

Input Type : Digital Separate
Interlaced : False
VerticalPolarity : False
HorizontalPolarity : False

Detailed Timing #2:

Pixel Clock : 148,5 Mhz

Horizontal Active : 1920 pixels
Horizontal Blanking : 280 pixels
Horizontal Sync Offset : 88 pixels
Horizontal Sync Pulse Width : 44 pixels
Horizontal Border : 0 pixels
Horizontal Size : 673 mm

Vertical Active : 1080 lines
Vertical Blanking : 45 lines
Vertical Sync Offset : 4 lines
Vertical Sync Pulse Width : 5 lines
Vertical Border : 0 lines
Vertical Size : 284 mm

Input Type : Digital Separate
Interlaced : False
VerticalPolarity : True
HorizontalPolarity : True

Monitor Range Limit:

Maximum Vertical Frequency : 75 Hz
Minimum Vertical Frequency : 56 Hz
Maximum Horizontal Frequency : 90 KHz
Minimum Horizontal Frequency : 30 KHz
Maximum Pixel Clock : 240 MHz


Please help me resolve it somehow Rolleyes
Find all posts by this user
Quote this message in a reply
09-24-2019, 05:58 PM
Post: #4216
RE: Custom Resolution Utility (CRU)
(09-24-2019 02:47 PM)TheSTronic Wrote:  I have lg 25um58-p 2х HDMI 1.4 2560x1080 aspect ratio 21:9 monitor with GA-78LMT-USB3 motherboard (ATI RADEON 3000 Graphics onboard), Windows 10.

I applied the patch for AMD/ATI Pixel Clock Patcher all values current state "already patched", value Low-resolution limit current state "found".
That GPU is too old. HDMI with that GPU is limited to 165 MHz pixel clock, which is not enough for 2560x1080 @ 60 Hz. AMD didn't officially support higher pixel clocks with HDMI until the 7000-series, and the patcher can only increase the HDMI limit for 5000-series and newer GPUs. You can try adding a detailed resolution for 2560x1080 @ 50 Hz instead of 60 Hz if the monitor allows lower refresh rates. If not, you should really get a newer video card, even if it's a cheap low-end one.
Find all posts by this user
Quote this message in a reply
09-25-2019, 10:36 AM (Last edited: 09-25-2019, 06:18 PM by TheSTronic)
Post: #4217
Rainbow RE: Custom Resolution Utility (CRU)
(09-24-2019 05:58 PM)ToastyX Wrote:  
(09-24-2019 02:47 PM)TheSTronic Wrote:  I have lg 25um58-p 2х HDMI 1.4 2560x1080 aspect ratio 21:9 monitor with GA-78LMT-USB3 motherboard (ATI RADEON 3000 Graphics onboard), Windows 10.

I applied the patch for AMD/ATI Pixel Clock Patcher all values current state "already patched", value Low-resolution limit current state "found".
That GPU is too old. HDMI with that GPU is limited to 165 MHz pixel clock, which is not enough for 2560x1080 @ 60 Hz. AMD didn't officially support higher pixel clocks with HDMI until the 7000-series, and the patcher can only increase the HDMI limit for 5000-series and newer GPUs. You can try adding a detailed resolution for 2560x1080 @ 50 Hz instead of 60 Hz if the monitor allows lower refresh rates. If not, you should really get a newer video card, even if it's a cheap low-end one.

I had followed you advice and added 2560x1080 @ 54 Hz in detailed resolutions (CRU 1.4.1) which is under 165 MHz pixel clock after this I saw it in display resolution settings and applied it. It work pretty well, now I am write it to you in 2560x1080 @ 54 Hz on ATI Radeon 3000 onboard. The monitor flicker free, so I do not think the lower refresh rate make any harm for my eyes.

I failed to add any higher values than 165 Mhz. The monitor can work 2560x1080 @ 75 Hz with some video cards and I think with a pixel clock patcher it should done the best (not found it for now).

For general users it almost impossible to make it work, but to upgrade their PCs even if they are satisfied with the current perfomence of their PCs. It was such a headache, I never thought before manufactures use some connections standards to limit the monitors compitability. I always thought only the GPU speed will affect a maximum resolution.

For now I am happy that with your help I done it Cool

Are you know how to initially power on my PC with 2560x1080 @ 54 Hz? For now it 1920*1080 in bios and after windows 10 loaded it becomes 2560x1080 @ 54 Hz.
Find all posts by this user
Quote this message in a reply
09-26-2019, 02:02 PM
Post: #4218
RE: Custom Resolution Utility (CRU)
(09-25-2019 10:36 AM)TheSTronic Wrote:  Are you know how to initially power on my PC with 2560x1080 @ 54 Hz? For now it 1920*1080 in bios and after windows 10 loaded it becomes 2560x1080 @ 54 Hz.
The only way to control the resolution outside of the OS is to flash a new EDID to the monitor, which is usually write-protected.
Find all posts by this user
Quote this message in a reply
09-27-2019, 04:22 PM
Post: #4219
RE: Custom Resolution Utility (CRU)
Thank you, I got it all.
Find all posts by this user
Quote this message in a reply
09-28-2019, 12:30 AM
Post: #4220
RE: Custom Resolution Utility (CRU)
Will this also work on Ryzen 3 2200G and AM4 A320? I tried using this app using DVI connection and my monitor went black
Find all posts by this user
Quote this message in a reply
 Post Reply


Forum Jump:


User(s) browsing this thread: 118 Guest(s)