Post Reply
Custom Resolution Utility (CRU)
11-05-2020, 04:18 AM
Post: #5281
RE: Custom Resolution Utility (CRU)
(11-04-2020 07:37 PM)ToastyX Wrote:  
(11-04-2020 06:35 PM)Fourgoblin Wrote:  I have a displayport 1.4 to hdmi 2.1 adapter that I use to get 4k120hz on my tv. Nvidia control panel does not allow 4k120hz as a native resolution so I tried to use CRU to force it as it works as a custom resolution. When I try to set the refresh rate to 120hz at 4k on CRU the refresh rate turns red and does not allow me to set it. How do I fix this?
EDID detailed resolutions are limited to 655.35 MHz pixel clock. The only way to add 3840x2160 @ 120 Hz is either in a TV resolutions data block in a CEA-861 extension block, or as a detailed resolution in a DisplayID data block.

I added it as both of those blocks but the option still does not appear in nvidia control panel or in display adapter properties
Find all posts by this user
Quote this message in a reply
11-05-2020, 01:53 PM
Post: #5282
RE: Custom Resolution Utility (CRU)
(11-04-2020 06:35 PM)Fourgoblin Wrote:  I have a displayport 1.4 to hdmi 2.1 adapter that I use to get 4k120hz on my tv. Nvidia control panel does not allow 4k120hz as a native resolution so I tried to use CRU to force it as it works as a custom resolution. When I try to set the refresh rate to 120hz at 4k on CRU the refresh rate turns red and does not allow me to set it. How do I fix this?
Do you have 48 Gbps HDMI 2.1 cable?

Do you have an RTX card? I think the adapter can use DSC to get 4K 120Hz. I don't know if it can do chroma sub sampling, etc.

What timing are you using to get 4K 120Hz (pixel clock)? 8bpc max for HBR3 without DSC is 1080 MHz but you probably have to go lower to allow headroom. If you have DSC then there should be no problem.
Find all posts by this user
Quote this message in a reply
11-05-2020, 05:12 PM (Last edited: 11-05-2020, 05:14 PM by Fourgoblin)
Post: #5283
RE: Custom Resolution Utility (CRU)
(11-05-2020 01:53 PM)joevt Wrote:  
(11-04-2020 06:35 PM)Fourgoblin Wrote:  I have a displayport 1.4 to hdmi 2.1 adapter that I use to get 4k120hz on my tv. Nvidia control panel does not allow 4k120hz as a native resolution so I tried to use CRU to force it as it works as a custom resolution. When I try to set the refresh rate to 120hz at 4k on CRU the refresh rate turns red and does not allow me to set it. How do I fix this?
Do you have 48 Gbps HDMI 2.1 cable?

Do you have an RTX card? I think the adapter can use DSC to get 4K 120Hz. I don't know if it can do chroma sub sampling, etc.

What timing are you using to get 4K 120Hz (pixel clock)? 8bpc max for HBR3 without DSC is 1080 MHz but you probably have to go lower to allow headroom. If you have DSC then there should be no problem.

Yes I have a 48Gbps 2.1 cable and a RTX 2080 super. These are the last settings I tried but still no luck. [img][Image: wJHbXct.png][/img][img][Image: JT2znfG.png][/img] [img][Image: AC57Dsq.png][/img][img][Image: qiU2RfX.png][/img]
Find all posts by this user
Quote this message in a reply
11-06-2020, 02:19 AM
Post: #5284
RE: Custom Resolution Utility (CRU)
(11-05-2020 05:12 PM)Fourgoblin Wrote:  Yes I have a 48Gbps 2.1 cable and a RTX 2080 super. These are the last settings I tried but still no luck.
Where's the original extension block? You probably need it for DSC to work.
Find all posts by this user
Quote this message in a reply
11-06-2020, 02:20 AM
Post: #5285
RE: Custom Resolution Utility (CRU)
(11-04-2020 09:00 PM)artur7 Wrote:  Hi everyone. Is it possible to enable HDR for non-HDR elements (like desktop) with the help of this software? When I enable HDR, it automatically decreases the brightness of the monitor if I have a solid black background, or that's more important if I watch a movie and there's a night sky for example. I mean, it decreases the brightness when there's something dark on the whole screen. I guess HDR just turns off for that moment and then turns on again. So... Is this a bug or a feature? The monitor: 15.6" IPS 1920x1080 FHD 240hz, nVidia GeForce RTX 2060 6 GB.
That sounds more like dynamic contrast in the monitor.
Find all posts by this user
Quote this message in a reply
11-06-2020, 03:20 PM
Post: #5286
RE: Custom Resolution Utility (CRU)
(11-06-2020 02:19 AM)ToastyX Wrote:  
(11-05-2020 05:12 PM)Fourgoblin Wrote:  Yes I have a 48Gbps 2.1 cable and a RTX 2080 super. These are the last settings I tried but still no luck.
Where's the original extension block? You probably need it for DSC to work.

I added the original block along with the display ID block and it worked. Thank you for the help.
Find all posts by this user
Quote this message in a reply
11-08-2020, 02:43 AM
Post: #5287
RE: Custom Resolution Utility (CRU)
Hi, when I use nvlddmkm patch and restart my computer. nividia drivers are removing themselves why ?
Find all posts by this user
Quote this message in a reply
11-08-2020, 02:49 AM
Post: #5288
RE: Custom Resolution Utility (CRU)
(11-08-2020 02:43 AM)nikram Wrote:  Hi, when I use nvlddmkm patch and restart my computer. nividia drivers are removing themselves why ?
Something is blocking the driver. Riot Vanguard and FACEIT Anti-Cheat are common culprits.
Find all posts by this user
Quote this message in a reply
11-08-2020, 03:20 AM
Post: #5289
RE: Custom Resolution Utility (CRU)
before updating, I turned everything off and turned off autostart. and then the same removes the drivers for the graphics card after the restart pc
Find all posts by this user
Quote this message in a reply
11-08-2020, 04:41 PM
Post: #5290
RE: Custom Resolution Utility (CRU)
If anyone faces Black Screen of Death after overclocking their reso then try doing system restore by entering the menu [When the PC is booting Hold Shift and mash F8 and choose advanced options then System Restore or try using Safe Mode and reset the resolution,do the same to enter safe mode.
.
.
.
.
.
.
.
Hope it helps Cool
Find all posts by this user
Quote this message in a reply
 Post Reply


Forum Jump:


User(s) browsing this thread: 91 Guest(s)