Post Reply
Custom Resolution Utility (CRU)
06-12-2014, 01:34 AM
Post: #911
RE: Custom Resolution Utility (CRU)
(06-11-2014 04:07 PM)aufkrawall Wrote:  Could it be possible to let CRU "spoof" 120Hz for the driver ("feature request" Big Grin )?
I don't know what you mean. There's no way to do anything like that with EDID overrides, and I don't see how that would solve your problem.

(06-11-2014 04:07 PM)aufkrawall Wrote:  For example, if you have 60Hz and 85Hz configured via CRU, some games still choose 60Hz and you can't force them to use the 85Hz resolution.
Games that do that usually can't handle higher refresh rates properly anyway. One option is to create a separate resolution like 1920x1078 for different refresh rates. If the monitor has scaling options or if you're using GPU scaling, make sure it's set to aspect scaling so it doesn't blur the image.
Find all posts by this user
Quote this message in a reply
06-12-2014, 01:10 PM (Last edited: 06-12-2014, 01:24 PM by damienlolz)
Post: #912
RE: Custom Resolution Utility (CRU)
Hello Toasty/everybody else,

I'm running a Qnix 2710 + r9 290 Catalyst 14.4, and while 120hz works fine on my desktop, anytime I try to open a game it gives me a garbled screen, even when I ctrl+alt+del and I have to reboot. I was skimming through this thread/looking for keywords about this but 92 pages is a lot to go through, so I apologize if this has been addressed. Does anyone know what could be causing this? I tested this on my girlfriend's computer with a 660ti using EVGA Precision and it has no issues in games... so I think I may have configured something incorrectly.

if it helps:

AMD FX 8320 @ stock
XFX R9 290 @ stock
Monoprice Dual-Link DVI cable
Catalyst 14.4
Find all posts by this user
Quote this message in a reply
06-13-2014, 02:24 AM
Post: #913
RE: Custom Resolution Utility (CRU)
When I add three detailed resolutions, the monitor description goes away. Is this by design?
Find all posts by this user
Quote this message in a reply
06-13-2014, 10:49 PM
Post: #914
RE: Custom Resolution Utility (CRU)
(06-13-2014 02:24 AM)Mangix Wrote:  When I add three detailed resolutions, the monitor description goes away. Is this by design?
The monitor name requires a detailed resolution slot, so it won't be included if there are four detailed resolutions.
Find all posts by this user
Quote this message in a reply
06-13-2014, 10:50 PM
Post: #915
RE: Custom Resolution Utility (CRU)
(06-12-2014 01:10 PM)damienlolz Wrote:  I'm running a Qnix 2710 + r9 290 Catalyst 14.4, and while 120hz works fine on my desktop, anytime I try to open a game it gives me a garbled screen, even when I ctrl+alt+del and I have to reboot. I was skimming through this thread/looking for keywords about this but 92 pages is a lot to go through, so I apologize if this has been addressed. Does anyone know what could be causing this?
I've only heard of that happening with when playing a video with the memory clock overclocked or when loading a game with a broken CrossFire setup. That shouldn't happen with a single card running at stock.

What timing parameters are you using? The blanking/totals might be too low for the GPU to handle.
Find all posts by this user
Quote this message in a reply
06-17-2014, 08:38 PM
Post: #916
RE: Custom Resolution Utility (CRU)
Hello ToastyX,

I cannot lower my refresh rate (1440p@60) to something like 50 or 30 Hz. May I know what is the problem here?

Thank you.
Find all posts by this user
Quote this message in a reply
06-20-2014, 05:41 AM
Post: #917
RE: Custom Resolution Utility (CRU)
(06-17-2014 08:38 PM)partogi Wrote:  I cannot lower my refresh rate (1440p@60) to something like 50 or 30 Hz. May I know what is the problem here?
You should be able to if the monitor can handle it. What monitor do you have? What happens if you try to lower the refresh rate? If the refresh rate is listed but the monitor won't display it, then the monitor can't handle lower refresh rates.
Find all posts by this user
Quote this message in a reply
06-20-2014, 08:38 PM (Last edited: 06-20-2014, 08:44 PM by totto2k)
Post: #918
RE: Custom Resolution Utility (CRU)
Hi,
first of all thanks for providing us your great tool! Smile
Here comes my question...
i am using Nvidia Driver 337.88 (on Geforce GTX 770 from Asus)

my screens used for my Triple Screen setup:
2 side screens (22 inch - 1680 x 1050):
Synchronization Range
Horizontal (Analog/Digital) 31.5-82.3 kHz
Vertical 56-75 Hz

Center Screen( 24 inch - 1920 x 1200)
Synchronization Range
Horizontal (Analog/Digital) 31.5-81.1 kHz
Vertical 56-76 Hz

I wanted to create a working setup with 1680*1050 for each screen.
it is working good but after a reboot, the "effect" has gone and the screens turn back to 60 Hz instead of 58 which I set for all screens before with CRU.
I already tried both methods for Nvidia cards ( disable the extension block and make sure GeForce Experience and Samsung Magician are not installed, or enable the extension block and import this file: blank-extension.dat)
Is this an issue with the current Nvidia driver?
I created an attachement (screenshot)

i use the CRU to get rid of this issue:
http://www.assettocorsa.net/forum/index....ost-167541


Attached File(s) Thumbnail(s)
   
Find all posts by this user
Quote this message in a reply
06-22-2014, 12:32 PM
Post: #919
RE: Custom Resolution Utility (CRU)
Hello!

What settings for 75Hz refresh rate can you recommend for me? I'm using Dell 2414H connected via DisplayPort cable with my new GTX 780.

Thanks!
Find all posts by this user
Quote this message in a reply
06-25-2014, 12:42 AM
Post: #920
RE: Custom Resolution Utility (CRU)
(06-20-2014 05:41 AM)ToastyX Wrote:  
(06-17-2014 08:38 PM)partogi Wrote:  I cannot lower my refresh rate (1440p@60) to something like 50 or 30 Hz. May I know what is the problem here?
You should be able to if the monitor can handle it. What monitor do you have? What happens if you try to lower the refresh rate? If the refresh rate is listed but the monitor won't display it, then the monitor can't handle lower refresh rates.

My monitor is Crossover 27Q. Native is 2560x1440@60 Hz.

Should I patch the driver?
Find all posts by this user
Quote this message in a reply
 Post Reply


Forum Jump:


User(s) browsing this thread: 45 Guest(s)