|
No display marked "Active"
|
|
09-08-2020, 01:12 AM
Post: #1
|
|||
|
|||
|
No display marked "Active"
I tried creating a custom res and it didn't work, I deleted all the displays I had and restarted, now I have my 3 displays but none of them are marked active.
Also now all my extension blocks just say "default. I've tried reset-all.exe and restarting after deleting them but nothing reverts it back. any ideas? Nyd |
|||
|
|
09-08-2020, 02:06 AM
Post: #2
|
|||
|
|||
|
RE: No display marked "Active"
What video card? What monitor? How is the monitor connected?
|
|||
|
|
|
09-08-2020, 10:08 PM
Post: #3
|
|||
|
|||
RE: No display marked "Active"
(09-08-2020 02:06 AM)ToastyX Wrote: What video card? What monitor? How is the monitor connected? Geforce 1050TI I have Samsung 55 1080P hooked up via HDMI to DVI, a LG hooked up via HDMI via a Display port adapter. The third device is a Samsung soundbar that is plugge directly in with HDMI. Not sure how to force CRU to be pull the EDID info again. Nyd |
|||
|
|
|
09-10-2020, 11:51 AM
Post: #4
|
|||
|
|||
|
RE: No display marked "Active"
You can't force CRU to read the EDID because it's not a CRU issue. CRU gets the active status directly from Windows, which gets the status from the graphics driver, so NVIDIA's driver is doing something weird. Do you have Surround enabled?
|
|||
|
|
|
09-10-2020, 10:39 PM
Post: #5
|
|||
|
|||
RE: No display marked "Active"
(09-10-2020 11:51 AM)ToastyX Wrote: You can't force CRU to read the EDID because it's not a CRU issue. CRU gets the active status directly from Windows, which gets the status from the graphics driver, so NVIDIA's driver is doing something weird. Do you have Surround enabled? I think I will do a clean install of the graphics drivers. Surround isn't recognized really by Windows, just sez stero. It does detect DTS/dolby digital but only 2 channels and 32.khz/44.1khz. Thanks again, Nyd |
|||
|
|
|
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 1 Guest(s)