Custom Resolution Utility (CRU)

[ToastyX]

(11-05-2022 04:13 PM)terry98 Wrote:  Hi ToastyX maybe you can look into this, I managed to fix it and return RTSS to the normal behavior by creating the resolution using DisplayID block with the blanking increased in the front porch and setting the block after the CTA-861 block (I had it before the CTA block) also I had to force synctotal =2500 in RTSS global template, if I don't use the increased front porch and the displayid after the CTA-861 it would simply not work. I'm using a Sapphire nitro+ RX 6800.

DisplayID normally comes after the CTA-861 extension block, but the order shouldn't matter unless you have duplicate resolutions defined. Make sure you delete the resolution you're trying to override.

[ToastyX]

(11-05-2022 03:13 PM)Poseidon Wrote:  I have an MSI RTX 2070 Super updated to the latest drivers. I tried using different drivers but no luck with CRU.

It's always NVIDIA with this sort of problem. Use DDU before upgrading the driver: https://www.wagnardsoft.com/display-driv...aller-DDU-

If DDU doesn't help, then report the problem to NVIDIA.

[terry98]

(11-07-2022 08:01 PM)ToastyX Wrote:  

(11-05-2022 04:13 PM)terry98 Wrote:  Hi ToastyX maybe you can look into this, I managed to fix it and return RTSS to the normal behavior by creating the resolution using DisplayID block with the blanking increased in the front porch and setting the block after the CTA-861 block (I had it before the CTA block) also I had to force synctotal =2500 in RTSS global template, if I don't use the increased front porch and the displayid after the CTA-861 it would simply not work. I'm using a Sapphire nitro+ RX 6800.

DisplayID normally comes after the CTA-861 extension block, but the order shouldn't matter unless you have duplicate resolutions defined. Make sure you delete the resolution you're trying to override.

Thanks! my bad for putting it before the cta block, but I'm sure I was not duplicating resolutions.

[Mrangelito2000]

what exactly does this application do, it was used but when i restarted my pc it gave an image again (i did it on a laptop monitor). I connect it to a monitor, it still does not give an image)

[ToastyX]

(11-09-2022 01:33 AM)Mrangelito2000 Wrote:  what exactly does this application do, it was used but when i restarted my pc it gave an image again (i did it on a laptop monitor). I connect it to a monitor, it still does not give an image)

It does what it says in the first post. The question is what exactly did you do or what are you trying to do? Your post is too vague.

[glidus]

Hello. Is it safe to change timing to CVT and the rest of presets?

[eed05f3c]

(11-04-2022 02:59 PM)ToastyX Wrote:  

(11-04-2022 11:48 AM)eed05f3c Wrote:  Yes, I can see Miracast display in CRU, and as far as I understand, even EDID information is read correctly (but I do not see max resolution option 1440x2560 there, other resolutions are displayed correctly). Problem is that any changes in CRU wont affect the display.

That's not the correct EDID. That EDID is for a Samsung S24F350, a 1080p monitor. I don't know where it's getting 1440x2560 from.

Nvm, there is an app named Second Screen (by samsung) in Microsoft Store, somehow it adds missing resolutions in display settings while screen extending with tablet. Thanks!

[ToastyX]

(11-11-2022 01:29 AM)eed05f3c Wrote:  Nvm, there is an app named Second Screen (by samsung) in Microsoft Store, somehow it adds missing resolutions in display settings while screen extending with tablet. Thanks!

Likely that uses its own driver, so that's outside the scope of CRU.

[ToastyX]

(11-09-2022 09:37 PM)glidus Wrote:  Hello. Is it safe to change timing to CVT and the rest of presets?

Yes, but if this for a non-CRT monitor, CVT and GTF just waste bandwidth.

[Tombrown]

Hi
I don’t know why my screen go black.Please help me