AMD/ATI Pixel Clock Patcher

[ToastyX]

(01-08-2014 12:03 PM)Shogun Wrote:  Hello Toasty, got a question for you in regard of an Active adapter

Goy myself a lappy Asus G75 VW that has a nvidia 670M, which has 1 hdmi, 1 vga and 1 mini DP.

I'd like to bring my lappy to a lan party ad use my Qnix 1440p at 120hz, so i went and did some research and bough this specific adapter.

http://www.ebay.com.au/itm/BIZLINK-DISPL...35cdc0d06b

It states that is a dual link D that will support resolution up to 1440p/2560*1600, however, im not sure about the refresh rate.

Do you know if it's possible get at least 110hz using that kind of adapter while using that adapter, connected to the Qnix monitor?
And if so, what is the procedure to get it done?

The only DisplayPort to dual-link DVI adapter I know about that can handle higher pixel clocks is this Accell adapter: https://www.amazon.com/dp/B00856WJH8/?tag=mtests-20#ad

It must be the one with 3D support (model B087B-007B), not the regular one. Even though it says 330 MHz pixel clock, supposedly it can handle around 400 MHz pixel clock. You might not be able to get 110 Hz, but 100 Hz should be possible.

Those adapters use DisplayPort, so the patch shouldn't be needed. You might run into problems adding custom resolutions if the laptop has switchable graphics. You'd have to add the custom resolution using Intel's control panel and not NVIDIA's, and I don't know what restrictions Intel has.