Threaded Mode | Linear Mode

choichoi10 · 01-06-2021, 03:09 AM

(01-05-2021 03:45 AM)ToastyX Wrote:
(01-05-2021 01:24 AM)choichoi10 Wrote: How do I change my native resolution? my graphics card thinks that my native resolution is 1024x768 and monitor's native resolution is 1366x768.
Make it the first detailed resolution.

I tried that already but the native resolution is still detected as 1024x768

Linak · 01-06-2021, 02:34 PM

Hello i have AOC C24G1 with the 48-144hz freesync range, but when i play rdr2 it flickers when i hit ~53fps is this normal? Thats why i want to lower range of freesync and need advice cuz im afraid to brick monitor if it even possible.
p.s. im on rtx2060 via display port.

Paulo · 01-06-2021, 03:38 PM

(01-06-2021 02:34 PM)Linak Wrote: Hello i have AOC C24G1 with the 48-144hz freesync range, but when i play rdr2 it flickers when i hit ~53fps is this normal? Thats why i want to lower range of freesync and need advice cuz im afraid to brick monitor if it even possible.
p.s. im on rtx2060 via display port.

O Linak, sorry, I cannot help you because I know nothing about this kind of things. I also had a question, but till now I hear nothing. But I wait for answer. Succes.

***ToastyX*** · 01-06-2021, 06:21 PM

(01-06-2021 03:09 AM)choichoi10 Wrote: I tried that already but the native resolution is still detected as 1024x768

What GPU do you have? What monitor is it? Your CRU screen shot doesn't show the "(active)" status. Are there any active monitors in the drop-down list?

***ToastyX*** · 01-06-2021, 06:27 PM

(01-06-2021 02:34 PM)Linak Wrote: Hello i have AOC C24G1 with the 48-144hz freesync range, but when i play rdr2 it flickers when i hit ~53fps is this normal? Thats why i want to lower range of freesync and need advice cuz im afraid to brick monitor if it even possible.
p.s. im on rtx2060 via display port.

No, it shouldn't flicker, but some monitors have issues with NVIDIA GPUs, which is why NVIDIA has G-Sync compatibility validation. You can't brick the monitor by lowering the range.

choichoi10 · 01-07-2021, 05:30 AM

(01-06-2021 06:21 PM)ToastyX Wrote:
(01-06-2021 03:09 AM)choichoi10 Wrote: I tried that already but the native resolution is still detected as 1024x768
What GPU do you have? What monitor is it? Your CRU screen shot doesn't show the "(active)" status. Are there any active monitors in the drop-down list?

750ti using vga cable to my vga monitor (Samsung s19d300)

this is what i did and 1366x768 is still not detected as native resolution:

***ToastyX*** · 01-07-2021, 02:14 PM

(01-07-2021 05:30 AM)choichoi10 Wrote: 750ti using vga cable to my vga monitor (Samsung s19d300)

this is what i did and 1366x768 is still not detected as native resolution:

You can't have a default extension block with NVIDIA, and something is wrong with the monitor or cable because it shouldn't be detected as a non-PnP monitor. Where did you get these resolutions from? The other screen shot you showed me is not the correct EDID for a Samsung monitor.

traderdude123 · 01-07-2021, 02:17 PM

@toastyx,

Is there anyway to force enable Dolby vision using CRU util. The EDID has a VSVDB which i believe contains data for identification of Dolby vision source devices.

i can force enable Dolby vision on my Apple Tv 4k.

Can the same be done using CRU?

i only need the TV to go into Dolby vision mode, unfortunately there is no control on the TV to force enable DV.

choichoi10 · (Last edited: 01-07-2021, 02:57 PM by choichoi10)

(01-07-2021 02:14 PM)ToastyX Wrote:
(01-07-2021 05:30 AM)choichoi10 Wrote: 750ti using vga cable to my vga monitor (Samsung s19d300)

this is what i did and 1366x768 is still not detected as native resolution:
You can't have a default extension block with NVIDIA, and something is wrong with the monitor or cable because it shouldn't be detected as a non-PnP monitor. Where did you get these resolutions from? The other screen shot you showed me is not the correct EDID for a Samsung monitor.

the firsts screenshot is wrong mybad, my monitor has always been detected as generic non pnp even with other vga cables and the resolutions are there already when i used Cru, what should i put in the extension block? really need help because idk how this works

(01-07-2021 02:49 PM)choichoi10 Wrote:
(01-07-2021 02:14 PM)ToastyX Wrote:
(01-07-2021 05:30 AM)choichoi10 Wrote: 750ti using vga cable to my vga monitor (Samsung s19d300)

this is what i did and 1366x768 is still not detected as native resolution:
You can't have a default extension block with NVIDIA, and something is wrong with the monitor or cable because it shouldn't be detected as a non-PnP monitor. Where did you get these resolutions from? The other screen shot you showed me is not the correct EDID for a Samsung monitor.

the firsts screenshot is wrong mybad, my monitor has always been detected as generic non pnp even with other vga cables and the resolutions are there already when i used Cru, what should i put in the extension block? really need help because idk how this works

tried adding adding 1366x768 in the extension block detailed resolutions but it after running restart64.exe my screen turns black and have to go safemode and reset all settings.

***ToastyX*** · 01-07-2021, 03:20 PM

(01-07-2021 02:49 PM)choichoi10 Wrote: the firsts screenshot is wrong mybad, my monitor has always been detected as generic non pnp even with other vga cables and the resolutions are there already when i used Cru, what should i put in the extension block? really need help because idk how this works

You don't need an extension block. You only need one detailed resolution for 1366x768 @ 60 Hz and nothing else.

"Non-PnP" means the graphics driver couldn't read the EDID, so there shouldn't be any resolutions in CRU by default.