Custom Resolution Utility (CRU)

[ToastyX]

(01-12-2021 02:33 PM)Kirby640L Wrote:  i have ASUS ROG Swift PG259QN with 360HZ but CRU isn't working.
Is there some way to get CRU work this this Monitor?

What isn't working? What are you trying to do?

[Kirby640L]

(01-12-2021 06:53 PM)ToastyX Wrote:  

(01-12-2021 02:33 PM)Kirby640L Wrote:  i have ASUS ROG Swift PG259QN with 360HZ but CRU isn't working.
Is there some way to get CRU work this this Monitor?

What isn't working? What are you trying to do?

Hey ToastyX,

thanks for your reply! Well i tried to make 360HZ work @ Display Scaling but sadly i did not make it work :[

only GPU is working - like i cannot make 1024 ( for example ) work @ fullscreen. Its like a tiny little black bars ( all the way ) screen then

thanks & cheers
Kirby

[ToastyX]

(01-12-2021 07:00 PM)Kirby640L Wrote:  thanks for your reply! Well i tried to make 360HZ work @ Display Scaling but sadly i did not make it work :[

only GPU is working - like i cannot make 1024 ( for example ) work @ fullscreen. Its like a tiny little black bars ( all the way ) screen then

Display scaling requires the monitor to support the resolution. G-Sync monitors only support a limited set of resolutions.

[Kirby640L]

(01-12-2021 09:59 PM)ToastyX Wrote:  

(01-12-2021 07:00 PM)Kirby640L Wrote:  thanks for your reply! Well i tried to make 360HZ work @ Display Scaling but sadly i did not make it work :[

only GPU is working - like i cannot make 1024 ( for example ) work @ fullscreen. Its like a tiny little black bars ( all the way ) screen then

Display scaling requires the monitor to support the resolution. G-Sync monitors only support a limited set of resolutions.

ah... is there a way to find out what resolutions are being supported?

[ToastyX]

(01-12-2021 10:01 PM)Kirby640L Wrote:  ah... is there a way to find out what resolutions are being supported?

You'll have to try and see. Usually it's just the native resolution and some lower fallback resolutions at 60 Hz.

[Reloaded87]

Possible to enable freesync on non freesync monitor via displayport? Or need Displayport-HDMI adapter? My monitor support only 60Hz via HDMI and 170Hz via Displayport. I need a high refresh rate of the monitor.

[ToastyX]

(01-13-2021 02:55 PM)Reloaded87 Wrote:  Possible to enable freesync on non freesync monitor via displayport? Or need Displayport-HDMI adapter? My monitor support only 60Hz via HDMI and 170Hz via Displayport. I need a high refresh rate of the monitor.

No.

[Xpaulo360]

Hi everyone, i have a oled c9 tv and a rx6800 graphics card, i tried to add freesync with CRU on my setup with no success, my screen turned black and i needed to restart on safe mode to reset CRU (it actually worked for like 10 minutes before going without signal), anyone knows if it is possible to enable freesync on this setup? i didnt find any option of VRR on amd driver, in theory VRR should work without CRU on this setup.

[cobhc]

(12-19-2020 03:11 AM)ToastyX Wrote:  

(12-19-2020 02:43 AM)cobhc Wrote:  I'm trying to run 1440p@120hz at more than 8bit 4:4:4 from an AMD 5700xt through HDMI into an LG CX. From what I understand the HDMI 2.0b port on the 5700xt should be able to do 1440p@120hz 10bit 4:2:2 but I can't choose anything other than 8bit 4:4:4 in the AMD driver settings. Could using CRU do anything to help me achieve my goal?

AMD GPUs will only do YCbCr 4:2:2 with TV resolutions.

Sorry for the delayed response. Would that still be the same using a DisplayPort to HDMI adapter?

[ToastyX]

(01-14-2021 02:39 PM)cobhc Wrote:  Sorry for the delayed response. Would that still be the same using a DisplayPort to HDMI adapter?

I don't know if AMD supports YCbCr with DisplayPort.