Custom Resolution Utility (CRU)
|
07-31-2022, 07:28 AM
Post: #6801
|
|||
|
|||
RE: Custom Resolution Utility (CRU)
I have a question, my monitor is a CRT Samsung syncmaster 997MB, my gpu is just the integrated graphics on an athlon 320GE, so i have the monitor connected directly through VGA, no convertors or adapters needed , it can do 1280x720p 120hz , 1600x900 100hz , im on Windows 11.
However, i dont think i've ever been able to make any Interlaced resolutions work, i've always wanted to play some games with interlaced scan (mainly GTA 4, Half-Life 1 and football games like Fifa and PES) , but i've never been able to have them show up in the Windows "display all nodes" option, back when i had an nvidia gpu (GTX660) i was using a displayport to vga adapter, which allowed me to do 720P 120HZ and 480P 165HZ , but never got interlaced resolutions to work neither. Is there a way at all for me to get Interlaced resolutions to work in Windows 11 or at least Windows 10??? I would prefer not to change the O.S but if its possible, im down. I really wanna play GTA 4, Half-Life 1 and PES with interlaced scan. |
|||
08-01-2022, 12:29 AM
Post: #6802
|
|||
|
|||
RE: Custom Resolution Utility (CRU)
(07-31-2022 07:28 AM)juanme555 Wrote: However, i dont think i've ever been able to make any Interlaced resolutions work, i've always wanted to play some games with interlaced scan (mainly GTA 4, Half-Life 1 and football games like Fifa and PES) , but i've never been able to have them show up in the Windows "display all nodes" option, back when i had an nvidia gpu (GTX660) i was using a displayport to vga adapter, which allowed me to do 720P 120HZ and 480P 165HZ , but never got interlaced resolutions to work neither.Interlaced support depends on the GPU. Newer GPUs don't support interlaced in the driver. I think GTX 660 does support interlaced, but not with DisplayPort, so it wouldn't have worked with the adapter. AMD supported VGA natively until the R9 380X, so interlaced should work on that. I don't know about integrated graphics. |
|||
08-01-2022, 03:55 AM
Post: #6803
|
|||
|
|||
RE: Custom Resolution Utility (CRU)
(08-01-2022 12:29 AM)ToastyX Wrote:(07-31-2022 07:28 AM)juanme555 Wrote: However, i dont think i've ever been able to make any Interlaced resolutions work, i've always wanted to play some games with interlaced scan (mainly GTA 4, Half-Life 1 and football games like Fifa and PES) , but i've never been able to have them show up in the Windows "display all nodes" option, back when i had an nvidia gpu (GTX660) i was using a displayport to vga adapter, which allowed me to do 720P 120HZ and 480P 165HZ , but never got interlaced resolutions to work neither.Interlaced support depends on the GPU. Newer GPUs don't support interlaced in the driver. I think GTX 660 does support interlaced, but not with DisplayPort, so it wouldn't have worked with the adapter. AMD supported VGA natively until the R9 380X, so interlaced should work on that. I don't know about integrated graphics. I see, so the last question would be: If i buy a GTX 980 , 980Ti or GTX Titan X (Maxwell) , could i be able to use interlaced resolutions with DVI-I to VGA adapter?? in Windows 11??? and also, do you think the Intel ARC Alchemist gpus will support interlaced resolutions on CRT's if hdmi vga converter is used? Im 25 y.o now, i've been wanting to play gta 4 and pes 2010 with interlaced res on a plasma tv or crt monitor since 2009 ![]() |
|||
08-01-2022, 02:18 PM
(Last edited: 08-01-2022, 02:18 PM by BuZzSBO)
Post: #6804
|
|||
|
|||
RE: Custom Resolution Utility (CRU)
I recently upgraded my VGA card from a Radeon 5700XT to a Nvidia 3090Ti and I am having problems setting up my 3 monitors setup.
The setup has: 2 monitors Samsung G5 34" @ 3440x1440 @ 165Hz (21:9) 1 monitor Samsung G9 49"@ 5120x1440 @ 240 Hz (32:9) Span 3 Monitors with 3090ti (1x Samsung G9 + 2x Samsung G5) for Microsoft Flight Simulator Using the Radeon 5700Xt there was the option to setup the monitors on SPAN mode using the AMD Radeon software, and that setup the Windows 10 resolution to 12000x1440. Perfect resolution and nothing streched. With my upgrade to 3090Ti, when I enable the Surround SPAN on the Nvidia software, the max resolution Windows 10 get is 6880x1440, which causes my center monitor to show the image stretched and that looks horrible. I tried to use the CRU software as recommended by a couple of people, but that didn't made any difference. Any suggestions on what else I can try? Just disappointed that my old 5700XT card had natively the option to have the best resolution and a brand new flagship 3090Ti can't handle this. |
|||
08-01-2022, 03:30 PM
Post: #6805
|
|||
|
|||
RE: Custom Resolution Utility (CRU)
(08-01-2022 02:18 PM)BuZzSBO Wrote: Using the Radeon 5700Xt there was the option to setup the monitors on SPAN mode using the AMD Radeon software, and that setup the Windows 10 resolution to 12000x1440. Perfect resolution and nothing streched.NVIDIA Surround does not support mixed resolutions. All monitors have to use the same resolution. |
|||
08-01-2022, 03:30 PM
Post: #6806
|
|||
|
|||
RE: Custom Resolution Utility (CRU)
(08-01-2022 03:55 AM)juanme555 Wrote: If i buy a GTX 980 , 980Ti or GTX Titan X (Maxwell) , could i be able to use interlaced resolutions with DVI-I to VGA adapter?? in Windows 11??? and also, do you think the Intel ARC Alchemist gpus will support interlaced resolutions on CRT's if hdmi vga converter is used?You should be able to, but I haven't tried that particular configuration. I can create interlaced resolutions with a GTX 1060 in Windows 10 when using DVI or HDMI. I don't know about Intel. |
|||
08-01-2022, 04:09 PM
Post: #6807
|
|||
|
|||
RE: Custom Resolution Utility (CRU)
(08-01-2022 03:30 PM)ToastyX Wrote:(08-01-2022 02:18 PM)BuZzSBO Wrote: Using the Radeon 5700Xt there was the option to setup the monitors on SPAN mode using the AMD Radeon software, and that setup the Windows 10 resolution to 12000x1440. Perfect resolution and nothing streched.NVIDIA Surround does not support mixed resolutions. All monitors have to use the same resolution. Thanks! Any idea why wouldn't support? Seems to be such easy setting for a powerful graphic card |
|||
08-01-2022, 07:00 PM
Post: #6808
|
|||
|
|||
RE: Custom Resolution Utility (CRU) | |||
08-01-2022, 08:48 PM
(Last edited: 08-01-2022, 08:50 PM by fin_swat)
Post: #6809
|
|||
|
|||
RE: Custom Resolution Utility (CRU)
Yes, i get 144hz on 1728x1080 lol
I believed my tv suports HDMI 2.0, i using 2.1 Cable lol But, my bpc its only 8 no more for exemple 12bpc =( (07-31-2022 07:27 AM)Mussels Wrote:(07-29-2022 05:11 AM)ToastyX Wrote:(07-28-2022 08:21 PM)fin_swat Wrote: I have a TV Philips resolution standart 1920x1080(60hz) and i get 144hz on CRU in 1728x1080 ok, fine.What TV supports 144 Hz? Are you sure the TV has HDMI 2.0? My TV Works you believed or not 300hz in 1360x728 LOL But i need custom resolution works 12bpc, and it not possibly in custom resolution, in low resolution or high =( |
|||
08-01-2022, 11:26 PM
Post: #6810
|
|||
|
|||
RE: Custom Resolution Utility (CRU)
(08-01-2022 03:30 PM)ToastyX Wrote:(08-01-2022 03:55 AM)juanme555 Wrote: If i buy a GTX 980 , 980Ti or GTX Titan X (Maxwell) , could i be able to use interlaced resolutions with DVI-I to VGA adapter?? in Windows 11??? and also, do you think the Intel ARC Alchemist gpus will support interlaced resolutions on CRT's if hdmi vga converter is used?You should be able to, but I haven't tried that particular configuration. I can create interlaced resolutions with a GTX 1060 in Windows 10 when using DVI or HDMI. I don't know about Intel. DAMN! GTX 10 series support Interlaced??? Thank you so much Toasty, you give me a lot to think about, i'll let you know how it goes when i pull the trigger. |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 67 Guest(s)